-
Physicochemical properties and hydrophobicity enhancement of water-washed durian peel by oxidative torrefaction at 250 °C
- Back
Metadata
Document Title
Physicochemical properties and hydrophobicity enhancement of water-washed durian peel by oxidative torrefaction at 250 °C
Name from Authors Collection
Affiliations
Kasetsart Agricultural and Agro-Industrial Product Improvement Institute, Kasetsart University, Bangkok, Thailand; Department of Industrial Chemistry, Faculty of Applied Science, King Mongkut's University of Technology North Bangkok, Bangkok, Thailand; Department of Chemical Engineering, Faculty of Engineering, King Mongkut's University of Technology Thonburi, Bangkok, Thailand; Department of Chemical Engineering, School of Engineering, King Mongkut's Institute of Technology Ladkrabang, Bangkok, Thailand; Department of Mechatronic Engineering, Faculty of Engineering, Rajamangala University of Technology Isan, Nakhon Ratchasima, Thailand; Department of Physical and Material sciences, Faculty of Liberal Arts and Science, Kasetsart University Kamphaeng Saen Campus, Nakhon Pathom, Thailand; National Energy Technology Center, National Science and Technology Development Agency, Pathumthani, Thailand
Source Title
International Journal of Sustainable Energy
ISSN
14786451
Year
2025
Volume
44
Issue
1
Open Access
All Open Access; Gold Open Access; Green Open Access
Publisher
Taylor and Francis Ltd.
DOI
10.1080/14786451.2025.2575983
Abstract
Durian peel presents disposal challenges but offers potential as a renewable biofuel feedstock. However, high ash content, hygroscopicity, and low energy density limit its direct application. This study examined the effects of oxidative torrefaction at 250 °C (0–21 vol% O₂) combined with water washing pre-treatment on the physicochemical and hydrophobic properties of durian peel. Fuel quality was evaluated by proximate and ultimate analyses, HHV, EMC, water contact angle, FTIR, and SEM. Water washing reduced ash content by ~80%. Increasing oxygen concentration promoted devolatilization and carbonisation, with carbon content rising above 55 wt% and HHV reaching 22.34 MJ/kg. The lowest EMC (7.25%) and hydrophobic stability were obtained for washed samples at 5 vol% O₂. SEM revealed porous carbon-rich structures, while FTIR confirmed the removal of hydrophilic groups. The combined method improved energy density, minimised ash, and significantly enhanced hydrophobicity, producing coal-like biofuel suitable for storage, transportation, and co-firing applications. © 2025 The Author(s). Published by Informa UK Limited, trading as Taylor & Francis Group.
License
CC BY
Rights
Authors
Publication Source
Scopus
Publication Source
Scopus